Sample accelerator coolers are used to remove any moisture from the gas is an authoritative step in sample gas condition. To achieve this, desirable coolers are applied to reduce the natural gas temperature below the dew point in order to condense the moisture. To secure a reproducible analysis result the dew item must remain angstrom static as possible evening when the ambient temperature fluctuates. The command cooling system capacity depends on the temperature fluctuations at the sampling web site ( which may vary over the course of the year ), the specific fabric combination for the heat exchanger to meet the sample gas typography and the energy-efficient operation of the cool. Application specific unlike types of coolers and/or precoolers may be required. The coolers are chiefly electric sample boast coolers, either semi-conductor or compressor coolers, the choice determined by the requirements or the operate conditions. replaceable inflame exchangers in a variety of material compositions and helpful accessories and monitors complete the product portfolio, including for EX zones .

Bühler Technologies sample gas coolers product range

Sample Gas Cooler Series TC-Mini

Sample Gas Cooler Series TC-MiniSample Gas Cooler Series TC-Mini many natural gas analysis processes require extracting sample flatulence from the process. This besides extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the quantify cells. The sample gas must consequently be conditioned before entering the analyzer. The sample distribution flatulence cool reduces the natural gas temperature to below the dew point for this function, causing moisture to drop out, which is then discharged as condensate. In addition to the condition output to monitor the sample accelerator cooler function, we offer an optional 4 – 20 milliampere analogue end product or digital interface. The process control can entree the process and diagnostic data via the Modbus RTU interface deoxyadenosine monophosphate well as configure the device settings.

The little size of the TC-MINI sample flatulence cool is particularly suited for installation in portable or compress gas condition systems. Despite the small size, it has a eminent nominal evaluation and is therefore besides suitable for use in warm climates .

Specifications

  • Peltier cooler with 1 heat exchanger
  • Version for ambient temperatures up to 50 °C
  • Nominal capacity 55 kJ/h (at 5 °C output dew point)
  • Power supply 24 V DC
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Dew point 3/5/10/15 °C or Delta-T control setting
  • Signal output 4 – 20 mA or Modbus RTU
  • Status display and output
  • Optional filter and moisture detector
  • Maintenance free
  • Low operating noise

Sample Gas Cooler Series TC-Standard

Sample Gas Cooler Series TC-StandardSample Gas Cooler Series TC-Standard many analysis processes require extracting sample distribution gasoline from the process. This besides extracts process-related contaminant such as particles or moisture. These can impact the measurement results or damage the measure cells. The sample boast must therefore be conditioned before entering the analyzer. The sample boast cooler reduces the gas temperature to below the dew steer for this purpose, causing moisture to drop out, which is then discharged as condensate. In accession to the potential-free condition output to monitor the sample gas cool function, we offer an optional 4 – 20 master of arts analogue output or digital interface. The march control condition can access the process and diagnostic data via the Modbus RTU communication protocol arsenic well as configure the device settings. Despite its compress size, the TC-Standard is a powerful sample flatulence cooler and already covers a large share of standard applications in gas analysis. circuit board heat exchangers are available in a assortment of materials and a large range of accessories can be directly built in to adapt the unit to the manoeuver conditions .

Specifications

  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 100 kJ/h (40 °C version) or 90 kJ/h (50 °C version)
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter and condensate pump optional

Sample Gas Cooler Series TC-Standard+

Sample Gas Cooler Series TC-Standard+Sample Gas Cooler Series TC-Standard+ many analysis processes require extracting sample accelerator from the process. This besides extracts process-related contaminant such as particles or moisture. These can impact the measurement results or damage the quantify cells. The sample gas must consequently be conditioned before entering the analyzer. The sample gas cool reduces the flatulence temperature to below the dew point for this purpose, causing moisture to drop out, which is then discharged as condensation. In addition to the status output to monitor the sample natural gas cooler officiate, we offer an optional 4 – 20 ma analogue output or digital interface. The march control can access the process and diagnostic data via the Modbus RTU interface american samoa well as configure the device settings. The TC-Standard+ series features a newfangled generation heat exchangers with a particularly humble moisten out impression of water- soluble components and are specifically suitable for measuring emissions. particularly the wash out impression of SO2 is first gear. These sample gas coolers can therefore be used for alleged automatize measuring systems ( AMS ) per EN 15267-3 .

Specifications

  • Low washout effects
  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • Optimized heat exchanger type 2 in Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 100 kJ/h (40 °C version) or 90 kJ/h (50 °C version)
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter and condensate pump optional

Sample Gas cooler series TC-Standard X2

Sample Gas cooler series TC-Standard X2Sample Gas cooler series TC-Standard X2 In specific accelerator technology In the chemical diligence, petrochemistry or biochemistry, reliable process control relies on prompt and exact decision of the operating parameters. here, flatulence analysis is the key for dependable and efficient manipulate of process flows, environmental auspices and quality assurance. This benefits controlling flue pipe gas discharge in power stations or exhaust gas analysis in automotive engineering, equally well as the effective control of air travel separators or sterile production and box in the food industry. many of the analysis processes used in these fields require extracting the sample gas. This inevitably besides extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the quantify cells. The sample boast must consequently be conditioned before entering the analyzer. many applications require equipment which can be used in explosive areas. This is where the TC-Standard X2 series provides solutions for Zone 2 or Class I, Division 2. Despite its small size, the TC-Standard X2 sample accelerator cool already covers a large share of standard applications in boast analysis .

Specifications

  • Very quick and easy filter changes without tools
  • ATEX and IECEx Zone 2 approval
  • FM C-US approval for Class I, Division 2
  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Low operating noise
  • Rated capacity 100/90 kJ/h, 40 °C/50 °C version
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Moisture detector connection, analog output, filter, and peristaltic pump optional to (auto) drain condensate via threaded connection (NPT 1/4″) inside filter cover

Sample Gas cooler series TC-Standard+ X2

Sample Gas cooler series TC-Standard+ X2Sample Gas cooler series TC-Standard+ X2 In emission measurement, process control relies on prompt and accurate determination of the operate on parameters. here, natural gas analysis is the key for safe and effective control of process flows, environmental security and timbre assurance. This benefits controlling flue pipe natural gas discharge in might stations a well as measurements in little burning plants or exhaust accelerator psychoanalysis in automotive engineering. many of the analysis processes used in these fields require extracting the sample gas. This inescapably besides extracts process-related contaminant such as particles or moisture. These in turning can impact the measurement results or damage the measure cells. The sample natural gas must consequently be conditioned before entering the analyzer. many applications require equipment which can be used in explosive areas. This is where the TC-Standard+ X2 serial provides solutions for Zone 2 or Class I, Division 2 .

Specifications

  • ATEX and IECEx Zone 2 approval
  • FM C-US approval for Class I, Division 2
  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • One gas path
  • Optimised heat exchanger type 2 in Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Low operating noise
  • Rated capacity 100/90 kJ/h, 40 °C/50 °C version
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Moisture detector connection, analog output, filter, and peristaltic pump optional

Sample Gas cooler series TC-Kit

Sample Gas cooler series TC-KitSample Gas cooler series TC-Kit The small TC-Kit sample gas cooler offers a variety show of options for initiation in natural gas analysis systems.
Gas analysis is the key for safe and effective control of serve flows, environmental protection and timbre assurance. This benefits controlling fluke gas emission in office stations or exhaust boast analysis in automotive engineering, deoxyadenosine monophosphate well as the efficient control of air separators or aseptic output and packaging in the food industry. many of the analysis processes used in these fields require extracting the sample gas. This inescapably besides extracts process-related contamination such as particles or moisture. These in turn can impact the measurement results or damage the measure cells. The sample gas must consequently be conditioned before entering the analyzer .

Specifications

  • Compact Design for installation in a gas cooling system
  • Effective heat release through external fans and cooling ribs
  • Version 24 V, optionally 230 V/115 V
  • Protection class IPxxC, with tight installation IP54
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Nominal capacity 110 kJ/h
  • Dew point stability 0.1 °C
  • Option to connect moisture detector and analog output
  • Optional connection and control of the condensation and sample gas pump, as well as a heated line

Sample Gas Cooler Series TC-KIT+

Sample Gas Cooler Series TC-KIT+Sample Gas Cooler Series TC-KIT+ Gas analysis is the key for safe and efficient control of process flows, environmental auspices and quality assurance. This benefits controlling flue pipe gas emission in office stations or run down gasoline analysis in automotive engineering, a well as the efficient control condition of air separators or aseptic production and box in the food industry. Gas analysis is the key for condom and efficient control of process flows, environmental security and timbre assurance. This benefits controlling flue gas emission in exponent stations or exhaust gas analysis in automotive engineer, a well as the effective control of air separators or sterile production and box in the food industry .

Specifications

  • Compact design for installation in a gas cooling system
  • Effective heat release through external fans and cooling ribs
  • Version 24 V, optionally 230 V/115 V
  • Protection class IPxxC, with tight installation IP54
  • One gas path
  • Optimised heat exchanger model made from Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Dew point stability 0.1 °C
  • Nominal capacity 110 kJ/h
  • MCD400 display module for separate installation
  • Option to connect moisture detector and analog output
  • Optional connection and control of the condensation and
  • sample gas pump, as well as a heated line

Sample Gas Cooler Series TC-MIDI

Sample Gas Cooler Series TC-MIDISample Gas Cooler Series TC-MIDI many analysis processes require extracting sample flatulence from the process. This besides extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measure cells. The sample distribution flatulence must therefore be conditioned before entering the analyzer. The sample boast cool reduces the gasoline temperature to below the dew target for this aim, causing moisture to drop out, which is then discharged as condensate. In addition to the condition output to monitor the sample boast cooler function, we offer an optional 4 – 20 ma analogue end product or digital interface. The serve dominance can access the process and diagnostic data via the Modbus RTU interface arsenic well as configure the device settings. The TC-MIDI series is in the crown performance class of sample flatulence coolers with one or two natural gas paths. circuit board inflame exchangers are available in a diverseness of materials and a large compass of accessories can be directly built in to adapt the unit to the operational conditions. The TC-MIDI Sample gas cool is particularly a part in gas conditioning when the work or ambient conditions require a higher cool capacity .

Specifications

  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 195 kJ/h (40 °C version) or 175 kJ/h (50 °C version)
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter, condensate pump and sample gas pump optional

Sample Gas Cooler Series TC-MIDI+

Sample Gas Cooler Series TC-MIDI+Sample Gas Cooler Series TC-MIDI+ many analysis processes require extracting sample gas from the serve. This besides extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measurement cells. The sample gas must therefore be conditioned before entering the analyzer. The sample gas cool reduces the boast temperature to below the dew point for this function, causing moisture to drop out, which is then discharged as condensation. In addition to the status output signal to monitor the sample flatulence cooler officiate, we offer an optional 4 – 20 massachusetts analogue output signal or digital interface. The work manipulate can entree the summons and diagnostic data via the Modbus RTU interface equally well as configure the device settings. The TC-MIDI+ sample accelerator cool is particularly a component in gas condition when the summons or ambient conditions require a higher cool capacity. It far features a new generation heat exchangers with particularly low flop of water-soluble components and particularly suitable for measuring emissions. Most notably, the washout of SO2 is low. The TC-MIDI+ sample flatulence coolers can consequently be used for so- called automated measuring systems ( AMS ) as per EN 15267-3 .

Specifications

  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • Duran glass or PVDF heat exchanger
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 195 kJ/h (40 °C version) or 175 kJ/h (50 °C version)
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperature display
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter, condensate pump and sample gas pump optional

Sample Gas Cooler Series TC-MIDI X2

Sample Gas Cooler Series TC-MIDI X2Sample Gas Cooler Series TC-MIDI X2 In the chemical diligence, petrochemistry or biochemistry, dependable process dominance relies on prompt and accurate decision of the operate parameters. here, gasoline analysis is the winder for safe and effective control of summons flows, environmental protection and quality assurance. This benefits controlling flue natural gas discharge in power stations or exhaust gas analysis in automotive engineering, american samoa well as the effective control of air separators or sterile production and packaging in the food diligence. many of the analysis processes used in these fields require extracting the sample distribution boast. This inevitably besides extracts process-related contamination such as particles or moisture. These in call on can impact the measurement results or damage the measure cells. The sample distribution gas must therefore be conditioned before entering the analyzer. many applications require equipment which can be used in explosive areas. This is where the TC-MIDI X2 serial provides solutions for Zone 2 or Class I, Division 2. The TC-MIDI X2 sample boast cool is a component in this stipulate chain if the procedure or ambient conditions require a higher cool capacity .

Specifications

  • Front panel installation
  • ATEX and IECEx Zone 2 approval
  • FM C-US approval for Class I, Division 2
  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Low operating noise
  • Rated capacity 195/175 kJ/h, 40 °C/50 °C version respectively rated capacity 185/166 Btu/h, 104 °F/122 °F – Version
  • Dew point stability 0.1 °C / 0.2 °F
  • Status display and output
  • Cooling block temperature display
  • Moisture detector, filter, analog output, peristaltic pump and sample gas pump optional

Sample Gas Cooler Series TC-MIDI+ X2

Sample Gas Cooler Series TC-MIDI+ X2Sample Gas Cooler Series TC-MIDI+ X2 In the chemical industry, petrochemistry or biochemistry, dependable march command relies on prompt and exact determination of the operate on parameters. here, gas analysis is the key for condom and efficient control of march flows, environmental protection and choice assurance. This benefits controlling flue pipe natural gas discharge in power stations or consume gas psychoanalysis in automotive engineering, adenine well as the effective control of air separators or sterile production and packaging in the food diligence. many of the psychoanalysis processes used in these fields require extracting the sample flatulence. This inevitably besides extracts process-related contamination such as particles or moisture. These in sour can impact the measurement results or damage the quantify cells. The sample distribution gasoline must therefore be conditioned before entering the analyzer. many applications require equipment which can be used in explosive areas. This is where the TC-MIDI+ X2 series provides solutions for Zone 2 or Class I, Division 2 .

Specifications

  • ATEX and IECEx Zone 2 approval
  • FM C-US approval for Class I, Division 2
  • Compact design: Pre-installed and ready to connect
  • Low maintenance costs based on easy accessibility
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Low operating noise
  • Rated capacity 195/175 kJ/h, 40 °C/50 °C version respectively rated capacity 185/166 Btu/h, 104 °F/122 °F version
  • Dew point stability 0.1 °C / 0.2 °F
  • Status display and output
  • Cooling block temperature display
  • Moisture detector, filter, analog output, peristaltic pump and sample gas pump optional

Sample Gas Cooler Series TC-Double

Sample Gas Cooler Series TC-DoubleSample Gas Cooler Series TC-Double many analysis processes require extracting sample gas from the summons. This besides extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measure cells. The sample flatulence must therefore be conditioned before entering the analyzer. The sample distribution gas cooler reduces the accelerator temperature to below the dew sharpen for this purpose, causing moisture to drop out, which is then discharged as condensate. Specifications

  • Two separate temperature settings
  • Two-stage cooling option
  • Heat exchanger made from stainless steel, Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Nominal cooling capacity 270 kJ/h (40 °C version) or 310 kJ/h (60 °C version)
  • Max. ambient temperature 60 °C
  • Dew point stability 0.1 °C
  • Status display and output
  • Cooling block temperatures display
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter and condensate pump optional

Sample Gas Cooler Series TC-Double+

Sample Gas Cooler Series TC-Double+Sample Gas Cooler Series TC-Double+ In accession to the condition output to monitor the sample boast cool routine, we offer an optional 4 – 20 master of arts analogue output signal or digital interface. The process control can access the process and diagnostic data via the Modbus RTU interface equally well as configure the device settings. The TC-Double+ serial combines the double cooling system arrangement of the TC-Double with particular heat exchangers. The TC-Double+ features a new generation of heat exchangers with peculiarly broken washout consequence of water-soluble components and are specifically desirable for measuring emissions. Most notably, the washout of SO 2 is humble. These sample distribution gas coolers can consequently be used for alleged automatize measuring systems ( AMS ) per DIN EN 15267-3 .

Specifications

  • Low washout effects
  • Two separate temperature settings
  • Two-stage cooling option
  • Duran glass or PVDF heat exchanger
  • Nominal cooling capacity 270 kJ/h (40 °C version) or 310 kJ/h (60 °C version)
  • Max. ambient temperature 60 °C
  • Dew point stability 0.1 °C
  • Status display and output
  • Optional 4 – 20 mA or Modbus RTU signal output
  • Optional CE mark or FM approval
  • Moisture detector, filter and condensate pump optional

Sample Gas Cooler Series TC-Double X2

Sample Gas Cooler Series TC-Double X2Sample Gas Cooler Series TC-Double X2 In the chemical industry, petrochemistry or biochemistry, reliable process control relies on prompt and accurate determination of the operate on parameters. here, flatulence psychoanalysis is the key for safe and efficient control of process flows, environmental auspices and quality assurance. This benefits controlling flue accelerator emission in power stations or exhaust gas analysis in automotive engineering, arsenic well as the effective control of air separators or sterile production and promotion in the food diligence.

many of the analysis processes used in these fields require extracting the sample gasoline. This inescapably besides extracts process-related contaminant such as particles or moisture. These in turn can impact the measurement results or damage the quantify cells. The sample flatulence must therefore be conditioned before entering the analyzer. many applications require equipment which can be used in explosive areas. This is where the TC-Double X2 series provides solutions for Zone 2 or Class I, Division 2 .

Specifications

In addition to the condition output to monitor the sample gas cool function, we offer an optional 4 – 20 massachusetts analogue output or digital interface. The serve operate can access the action and diagnostic data via the Modbus RTU interface ampere well as configure the device settings. The TC-Double+ series combines the doubling cooling system arrangement of the TC-Double with particular heat exchangers. The TC-Double+ features a newfangled genesis of heat exchangers with peculiarly broken washout consequence of water-soluble components and are specifically desirable for measuring emissions. Most notably, the washout of SO 2 is low. These coolers can consequently be used for alleged automatize measuring systems ( AMS ) per DIN EN 15267-3 .

Sample Gas Cooler Series TC-Double+ X2

Sample Gas Cooler Series TC-Double+ X2Sample Gas Cooler Series TC-Double+ X2 many gas psychoanalysis processes require extracting sample gas from the procedure. This besides extracts process-related contamination such as particles or moisture. These can impact the measurement results or damage the measure cells. The sample gas must therefore be conditioned before entering the analyzer. The sample distribution gas cooler reduces the accelerator temperature to below the dew point for this determination, causing moisture to drop out, which is then discharged as condensate.. In addition to the status output to monitor the sample gasoline cooler function, we offer an optional 4 – 20 master of arts analogue output or digital interface. The process dominance can access the process and diagnostic data via the Modbus RTU interface american samoa good as configure the device settings. The RC 1.1 is a compressor sample gasoline cool designed for high cooling output and high ambient temperatures. Depending on the application, it can be configured with one or two natural gas paths. This makes it a full of life cool component in sophisticated analysis systems .

Specifications

  • ATEX and IECEx Zone 2 approval
  • FM C-US approval for Class I, Division 2
  • Low wash out effects
  • One gas path
  • Duran glass or PVDF heat exchanger
  • Rated power 270/310 kJ/h, 40 °C/60 °C version respectively rated power 256/294 Btu/h, 104 °F/140 °F version
  • Max. ambient temperature 60 °C / 140 °F
  • Dew point stability 0.1 °C / 0.2 °F
  • Status display and output
  • Moisture detector connection, analog output, filter and peristaltic pump optional

Sample Gas cooler series RC 1.1

Sample Gas cooler series RC 1.1Sample Gas cooler series RC 1.1 many gas analysis processes require extracting sample gasoline from the process. This besides extracts process-related contaminant such as particles or moisture. These can impact the measurement results or damage the measure cells. The sample distribution gas must therefore be conditioned before entering the analyzer. The sample distribution flatulence cool reduces the boast temperature to below the dew point for this purpose, causing moisture to drop out, which is then discharged as condensate.. In addition to the status output to monitor the sample gasoline cooler serve, we offer an optional 4 – 20 massachusetts analogue output or digital interface. The process control can entree the process and diagnostic data via the Modbus RTU interface vitamin a well as configure the device settings. The RC 1.2+ features a new generation hotness exchangers with a peculiarly low wash out consequence of water-soluble components and are specifically desirable for measuring emissions. Most notably, the flop of SO2 is gloomy. RC 1.2+ sample gasoline coolers can consequently be used for alleged automatize measuring systems ( AMS ) per EN 15267-3 .

Specifications

  • 2 heat exchangers in series
  • Heat exchanger in glass and PVDF
  • Power supply 115 to 230 V
  • Nominal capacity 110 kJ/h
  • Dew point stability 0.1 °C
  • Adjustable outlet dew point and alarm thresholds
  • low wash out effects
  • Protection class IP44
  • Optional port for test gas and instrument air
  • Optional heated line connection and con

Sample Gas cooler series RC 1.2+

Sample Gas cooler series RC 1.2+Sample Gas cooler series RC 1.2+ There frequently is a motivation to remove gaseous components from the sample accelerator through adsorption/absorption. For applications where the incidence of interfering components may fluctuate or the materials must have a long life, the ADF-170/300 model housings are the exceed choice .

Specifications

  • All-purpose, in various sizes
  • Available with high-efficiency NH3 absorber filling
  • Up to 38.000 hours life time for NH3 absorber
  • Quick and easy maintenance (tool-less)
  • Chemical and temperature-resistant materials
  • Condensate output optional

Sample Gas cooling unit CU-EMA +

Sample Gas cooling unit CU-EMA +Sample Gas cooling unit CU-EMA + In the chemical industry, petrochemistry or biochemistry, dependable serve see relies on immediate and accurate determination of the operate parameters. here, accelerator analysis is key for safe and efficient control of process flows, environmental protection, and quality assurance. many of the analysis processes used in these fields require extracting the sample accelerator. This inevitably besides extracts process-related contaminant such as particles or moisture. These in turn can impact the measurement results or damage the measure cells. The sample gas must therefore be conditioned before entering the analyzer. The CU-EMA+ serial features a new generation heat exchangers with a peculiarly low wash out effect of watersoluble components. special design features make the sample flatulence cool particularly suitable for use in applications with senior high school oscillation ( e.g. marine applications ) .

Specifications

  • 2 heat exchangers in series
  • Heat exchanger in glass and PVDF
  • Power supply 115 to 230 V
  • Nominal capacity 110 kJ/h
  • Dew point stability 0.1 °C
  • Adjustable outlet dew point and alarm thresholds
  • low wash out effects
  • Protection class IP44
  • Optional port for test gas and instrument air
  • Optional heated line connection and controller

Sample Gas cooler series EGK 1 Ex2

Sample Gas cooler series EGK 1 Ex2Sample Gas cooler series EGK 1 Ex2 There frequently is a indigence to remove gaseous components In emission measurement, process control relies on prompt and exact determination of the operating parameters. here, accelerator analysis is key for condom and effective control of process flows, environmental protection and quality assurance. This benefits controlling flue pipe gas discharge in ability stations or run down accelerator psychoanalysis in automotive engineer, angstrom well as the efficient control of tune separators or sterile output and promotion in the food industry. many of the analysis processes used in these fields require extracting the sample flatulence. This inevitably besides extracts process-related contamination such as particles or moisture. These in change state can impact the measurement results or damage the measure cells. The sample distribution gas must consequently be conditioned before entering the analyzer. The EGK 1 Ex2 is ATEX and IECEx approved and is suitable for mathematical process in explosive zones with up to 2 gas paths .

Specifications

  • Compact installation
  • One or two gas paths
  • Heat exchanger made from stainless steel, Duran glass and PVDF
  • Bühler constant control system
  • Self-monitoring
  • Block temperature display
  • Status alarm
  • Rated cooling power 320 kJ/h / 303 Btu/h
  • Dew point stability 0.1 °C / 0.2 °F
  • CFC-free
  • Ex approved Zone 2

Sample Gas Cooler EGK 1SD

Sample Gas Cooler EGK 1SDSample Gas Cooler EGK 1SD EGK series compressor sample gas coolers feature a construction design which ensures they maintain an extremely stable gasoline wall socket dew point. At the congress of racial equality of this sample distribution gasoline cooler is a cool forget which, along with the sophisticated Bühler constant see system, ensures even heat profligacy. The cool system is charged with CFC-free refrigerant and is maintenance-free. The restraint system keeps the preset end product dew point at a constant. A expose shows the temperature of the cool parry. If besides features a fail-safe control relay end product for excess and low temperature. These status outputs grade a stove of ± 3 K of the output dew point fructify. The relay output can be used to e.g. control the sample flatulence pump for the gas flow to only be switched on once the permissible cool range has been reached. Depending on the task, the EGK 1SD can be configured to have one or two flatulence paths, ampere well as steel, PVDF or glass heat exchangers. Depending on the operate mood of the condition arrangement, the condensate is drained by automatic condensation drains or peristaltic pumps. Condensate traps may besides be used .

Specifications

  • Compressor Cooler
  • Nominal capacity 320 kJ/h respectively 303 btu/h
  • 1 or 2 gas paths
  • Stainless steel, glass or PVDF heat exchanger
  • Self-monitoring
  • Bühler constant regulator system

Sample Gas Cooler EGK 2-19

Sample Gas Cooler EGK 2-19Sample Gas Cooler EGK 2-19 In the chemical industry, petrochemistry or biochemistry, reliable procedure control relies on immediate and accurate determination of the engage parameters. hera, gasoline analysis is key for safe and effective control of process flows, environmental security, and quality assurance. This benefits controlling flue pipe natural gas discharge in baron stations or exhaust gas psychoanalysis in automotive technology, american samoa well as the effective master of vent separators or sterile production and packaging in the food diligence. Many of the analysis processes used in these fields require extracting the sample gas. This inevitably besides extracts process-related contaminant such as particles or moisture. These in call on can impact the measurement results or damage the measure cells. The sample distribution boast must consequently be conditioned before entering the analyzer. The pack system EGK 2-19 is a 19″ rack with sample distribution accelerator cooler and condensate drain, atom filter and moisture detector for up to two gas paths .

Specifications

  • All-purpose Compact gas conditioning
  • Fully assembled and ready to connect
  • Nominal capacity 320 kJ/h respectively 303 btu/h
  • Microcontroller
  • Dew point and alarm limit settings
  • 1 or 2 gas paths

Sample Gas Cooler EGK 2-19+

Sample Gas Cooler EGK 2-19+Sample Gas Cooler EGK 2-19+ In emission measurement, process operate relies on prompt and accurate decision of the manoeuver parameters. here, natural gas analysis is key for dependable and effective control of action flows, environmental auspices, and timbre assurance. This benefits controlling fluke accelerator emission in ability stations or measuring emissions in humble furnaces and exhaust gasoline analysis in automotive engineering. many of the analysis processes used in these fields require extracting the sample distribution gas. This inescapably besides extracts process-related contaminant such as particles or moisture. These in turn can impact the measurement results or damage the quantify cells. The sample distribution accelerator must therefore be conditioned before entering the analyzer. The EGK 2-19+ series features a fresh generation heat exchangers with a peculiarly humble wash out effect of water-soluble components and are specifically desirable for measuring emissions. peculiarly washout of SO2 is low. These sample boast coolers can therefore be used for alleged automatize measuring systems ( AMS ) per EN 15267-3 .

Specifications

  • Compact design: fully assembled and ready to connect
  • Low maintenance costs based on easy accessibility
  • One gas path
  • Optimised heat exchanger type 2 in Duran glass or PVDF
  • Adjustable outlet dew point and alarm thresholds
  • Self-monitoring
  • Status outputs
  • Ambient temperatures up to 50 °C / 122 °F
  • Rated cooling power 320 kJ/h respectively 303 btu/h
  • Dew point stability 0.1 °C / 32.2 °F
  • Available as 19″ rack or for wall-mounting

Sample Gas Cooler EGK 2A Ex

Sample Gas Cooler EGK 2A ExSample Gas Cooler EGK 2A Ex This sample gas cool was designed specifically for use in explosive areas. It features a high performance compressor cooling system which ensures an highly stable gas end product dew point, tied in ambient temperatures up to +45 °C / 113 °F. The cooling block can accommodate two high efficiency estrus exchangers, available in stainless steel, Duran glass or PVDF, with one or two boast paths. Fully equipped the sample gas cooler can therefore supply four separate gas paths. heat dissipates through a large convector, the electronic control is moulded and located in a separate housing. A programmable expose shows the temperature of the cool engine block. A flash display indicating excess and broken temperature and a fail-safe see relay output. These condition outputs mark an adjustable scope around the output dew point. automatic condensation drains can be installed inside the device to drain condensation .

Specifications

  • Compressor Cooler
  • Nominal capacity 615 kJ/h respectively 583 Btu/hr
  • 1 or 2 gas paths
  • Stainless steel, glass or PVDF heat exchanger
  • Status display
  • Up to 45 °C / 113 °F ambient temperature 
  • Approvals: ATEX, GOST

Sample Gas Cooler EGK 4S

Sample Gas Cooler EGK 4SSample Gas Cooler EGK 4S EGK series compressor sample gasoline coolers feature a structure design which ensures they maintain an highly stable gas exit dew degree. At the congress of racial equality of this sample distribution gas cooler is a cool blockage which, along with the sophisticate Bühler ceaseless operate system, ensures even inflame profligacy. The cooling system system is charged with CFC-free refrigerant and is maintenance-free. The control system keeps the preset output signal dew steer at a changeless. A display shows the temperature of the cool parry. If besides features a fail-safe control relay end product for excess and humble temperature. These condition outputs mark a roll of ± 3 K of the end product dew luff setting. The relay output signal can e.g. be used to control the sample boast pump to allow for the flatulence flow to entirely be switched on once the permissible cool scope has been reached. Depending on the tax, the EGK 4S can be equipped with up to four heating system exchangers of different types and materials. This allows for up to eight distinguish natural gas paths. The condensate can be drained via peristaltic pumps or automatic pistol condensation drains. The sample boast cool can be equipped with adjustable feet, mounting brackets, or handles .

Specifications

  • Compressor Cooler
  • Nominal capacity 800 kJ/h respectively 583 Btu/hr
  • Up to 4 gas paths
  • Stainless steel, glass or PVDF heat exchanger
  • Temperature and status display
  • Ambient temperature up to 50 °C / 122 °F

Sample Gas Cooler EGK 10

Sample Gas Cooler EGK 10Sample Gas Cooler EGK 10 The basic components of the EGK 10 equate to the EGK 4 series, however features a higher cool capacity and big hang rates, optimized specifically for shunt applications. It uses a extra size high-efficiency heat exchanger. This heat exchanger is available with glass line for critical applications. EGK series compressor sample distribution gas coolers feature a construction invention which ensures they maintain an highly stable gas exit dew point. At the congress of racial equality of this cool is a cooling system blockage which, along with the advanced Bühler constant master system, ensures even heat waste. The electronic restraint features an LED display and a relay output signal for the cooling status which indicates when the defined function crop has been reached. A stainless steel steel heat exchanger plugs into the cool obstruct. The cool organization is maintenance-free. adjustable feet, handles, and brackets are sold individually .

Specifications

  • Compressor Cooler
  • Nominal capacity 1450 kJ/h respectively 1374 Btu/h
  • Up to 3900 L/h
  • Stainless steel heat exchanger
  • Temperature and status display
  • Ambient temperature up to 50 °C / 122 °F

In addition to the above products, ASaP B.V. can quickly deliver all spare parts for sample gas pumps, coolers, and probes.

  • Filters
  • Filter elements
  • Condensate Drains
  • Tubes (hoses)
  • Valves
  • Pump Heads
  • Bellows
  • O-rings
  • And everything else

specialist icon

Contact our spare part specialist

You can contact us when it suits you. See our specialist ’ s contact information below .Gertjan Mastenbroek Gertjan Mastenbroek 🔧 Inside Sales 📨 gmastenbroek @ asap.nl 📞 +31 ( 0 ) 20 21 17 0 10 🔗 LinkedIncontact icon

Let our spare part specialist contact you

Let us know how we can reach you. We will only use this data for contacting you.

Sample gas coolers to reduce temperature by Bühler Technologies

Leave a Reply

Your email address will not be published.