Cleanroom Tacky Mats® by Liberty Industries

Tacky Mats® prevent crap and contaminants from entering cleanroom environments. These mats consist of an adhesive airfoil designed to pull impurities from the bottom of footwear. Perfect for aesculapian device manufacture, research laboratories, aerospace fabrication, hospitals, and food service facilities, Tacky Mats® allow workers to enter cleanroom environments without tracking crap, debris, and other impurities into the sphere that could contaminate processes or products. View Our Tacky Mat® Products

What is a Tacky Mat®?

Tacky Mats® are besides called cleanroom awkward mats that are designed to clean the bottom of footwear to prevent particulates and contaminants from entering designated cleanroom spaces. The airfoil of the mat consists of strong adhesive material coatings and contoured patterns that pull the contaminants off of footwear as the actor walks across it. A Tacky Mat® boosts the efficiency of casual processes as workers do not have to spend time changing into disposable booties or shoes before entering the cleanroom area. With these cleanrooms mats, contaminants and particulates will not accumulate on the deck that could be drawn up onto work surfaces. Our Tacky Mat® products include :

Tacky Mat® 800030

Our most democratic Tacky Mat®, the Tacky Mat® 800030 helps you minimize footbourne contamination without costing you a fortune. Each flat consists of 30 disposable sheets that use solid adhesive coatings to remove crap on contact .

tacky mat for cleanroomsHow to Install Cleanroom Tacky Mat®

Tacky Mat® initiation involves the follow steps :

Select Proper Location and Placement

locate Tacky Mats® ( muggy mats ) at the entrances of both the cleanroom and the cleanroom gowning sphere. ideally, these mats should permit workers to take two to three steps through them before entering the cleanroom. This allows the mat to amply remove dirt and debris.

Identify and Consider Your Surface

Tacky Mats® adhere good to smooth, nonporous, and moisture-free surfaces. This makes smooth vinyl flooring and tile equally well as smooth epoxy-finished floors the most ideal choice for Tacky Mat® facility .

Prepare Your Surface

Make certain you install your Tacky Mat® on a clean surface. After clearing the installation area of all remainder, film, soil, and debris, allow adequate fourth dimension for the coat to amply dry before laying down the flat .

Mat Installation

start by placing two corners of the mat on the fix open. Make certain you slightly bend the entangle up from the face-to-face end while keeping the remaining separate of the mat amply touching the surface. then, slowly and firm press the entangle to the floor, working widthwise from the two corners across the stallion mat. After this, apply weight to the mat to ensure uniform distribution of the bottomland adhesive.

Tips on Using Tacky Mats®

  • Best places for Tacky Mats®. To ensure cleanroom cleanliness, consider placing Tacky Mats® in front of cleanroom entrances and inside the cleanroom at gowning and staging areas.
  • Ensure Maximum Length of Tacky Mats®. The Tacky Mat® should be long enough so that a worker has to take a full 2-3 steps across. This length ensures that the mat has removed more debris from both shoes.
  • Reposition Tacky Mat® Vertically. If the Tacky Mat® is the size of a welcome mat due to space limitations, reposition the mat so that it is vertical to the door instead of horizontal. This position provides more walking room for the Tacky Mat® to pick up as many contaminants as possible from footwear.
  • Changing Disposable Sheets. Change out dirty disposable sheets when the older layer becomes too full of contaminants to properly clean footwear. The timeframe may be around 50 walkthroughs, although you may change it sooner based on the number of contaminants in the working environment, the number of workers treading across the Tacky Mats®, and if rolled carts come in contact with the mats that could pull off the adhesive coating.

TACKY MAT® 800030

Tacky Mats® from Liberty Industries

Liberty Industries provides a compass of Tacky Mats® for commercial, manufacture, and industrial cleanroom environments. Our tacky Mats® and other cleanroom solutions ensure processes and products remain scavenge and minimize cross contaminant. Browse our catalog to see our huge selection of cleanroom products, or contact us today to discuss our services. Tacky Mat® is a register trademark to Liberty Industries Inc .

Leave a Reply

Your email address will not be published.