PVC Material
Release Liner

▲ Standard Size & Appearance

Classification Unit Spec Remark
Thickness Surface materials um 120±2% High-grade PVC-Polymeric
Glue um 30±2% High-quality Solvent-based
Release liner um 180±2 % ( paper ) / 130±2 % ( plastic )
Surface Opaque
Width mm 1520±0. 01%
Length mm 1800+1%

Physical properties 

▲ General Properties

Features Test Method Results
Release force
25℃ and 50% 0.12
Initial tack
under 26℃ and 64%, GB31125-2014 1167
Peel Strength
25℃and 42%, GB/T2792-1998 8.12
Holding power(h) 25℃ and 50%, GB/T4851-1998 72.09
Shelf life stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place 2 years
Application temperature / +20℃ to +30℃
Aging Test 1 7 days under 65°C No adhesive residue with heat
Aging Test 2 10 days under 65°C No adhesive residue without heat
Shrinkage / less than 4%

Read more: Gemsoft Treasure

Is your cable car looking a small tarnish ? Give it a new front with Matte Metallic Bond Gold car wrap ! This wrap is a great way to add a touch of luxury and classify to your car. The flatness metallic eat up is ideal for people who want their vehicle to look satiny, classy, and twist .
The flat metallic gold color is ideal for cars that need a piece of a radiance. This is a durable and weatherproof wrapping that can withstand the elements. It will besides not harm your paint. The flat metallic bond gold cable car wrap is easy to apply and remove. You do not have to worry about the adhesive material skin off because a sticky film backs it. The flat metallic gold car wrapping can be applied in one of two ways :

The cable car wrap can be applied using the peel and stick method acting. All you need to do is peel off the protective movie from the back and place the cable car wrap on your car. When applying the car envelop, peel it off and throw it away .
Features & Specifications:

  • No damage to vehicle paint
  • No damage to the windshield
  • Easy to apply and remove
  • Protects the car from damage caused by the sun’s UV rays
  • Increase visibility and be noticeable to other road users
  • Keeps your car from fading in color

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for glossy films. No pull and overheat and Post heat is necessary.
Post-heating temperature: 110°C directly surfaces, 130°C curves, and overlaps
Aftercare: PH impersonal, Avoid wax or solvents

The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch .

Leave a Reply

Your email address will not be published.