Metecno Sandwich Panel Roofing Sheets

Metecno Sandwich Panel Roofing Sheets
Metecno is a well-known name in the sandwich dialog box roofing sheets domain. The company was established in India in 2005. The caller manufactures roofing sheets/panels, rampart panels, insulated panels, and cold storehouse doors. It has a bearing in more than ten-spot countries including India. Metecno products are backed by professional servicing. One of Metecno’s mho products is the sandwich panel roofing plane.
What are Sandwich Panel Sheets?
besides known by the generic name of PUF sheets, sandwich panel sheets are prefabricated individual pieces of rigid polyurethane foam sandwiched between two alloy sheets. The PUF is glued to the alloy sheets, providing an insulating effect. While sandwich panel roofing sheets are democratic, they besides find application in walling.

Metecno’s sandwich panel consists of two facings of relatively thin metal sheets. To suit roofing needs, the effect is of appropriate lastingness but is distillery fall weight. It has sufficient stiffness in a direction normal to the face of the dialog box. The congress of racial equality is made of durable polyurethane. The facings are of steel or aluminum, making the roofing durable. Metecno sandwich panel sheets are available in thicknesses ranging from 30 to 120 mm. They are available in widths of 1000 millimeters to 1200 millimeters. The maximum length of each panel is 15 meters.
Because of its construction, Metecno sandwich panel sheets have a built-in advantage over convention panels used for roofing. They include :

  • High load-bearing capacity at low weight
  • Excellent and durable thermal insulation
  • Absolute water and vapor barrier
  • Excellent airtightness and free of thermal bridges which results in considerable energy savings.
  • Surface finished facings provide resistance to weather and aggressive environments
  • Capacity for rapid erection without lifting equipment; easier installation in hostile weather conditions
  • Easy repair and replacement in case of damage
  • Long life and very low maintenance cost
  • Good sound insulation
  • Reasonable fire reaction and resistance

Advantage of Metecno sandwich panel sheets
table of Safe spans
Metecno guarantees the values of the external face in steel, 0.5 millimeters thick, and internal confront in steel, 0.4 millimeters dense or with both faces in aluminum 0.6 thick with external face in aluminum, 0.6-millimeter compact, and internal confront in steel, 0.5 millimeters dense. The spans per meter as a function of a uniformly distributed overload P ( kg / m2 ) have been obtained from load tests carried out in Metecno laboratories, and provide a deflection degree Fahrenheit < = liter / 200 with a safety coefficient that complies with the UEAtc standards for isolate panels, which have been established and are implemented by chief European Certifying Organizations.

With external and/or internal steel thickness subscript to the above-mentioned ones, the guarantee on the admissible loads for the spans indicated in the mesa is maintained, while it is not maintained on the deflection terminus ad quem and the safety coefficient.
Metecno has many sandwich panel roofing sheet profiles. At Mamata, we are their stockists for the Glamet roofing impanel and the Mono roofing jury.
Metecno Glamet Sandiwch Panels
These CFC barren traditional roofing sheets use self-supporting polyurethane insulating material for pitch roofs. While it is meant to work for slopes of 7 % or more, it is possible to use Metecno Glamet for slopes less than 7 % with expert technical foul advice.

Metecno Glamet sandwich panels use a high tensile base metallic element which is coated with Zinc and Aluminium ally. This makes the roofing sheets durable. In addition, the exterior side of the panels is coated with a micro layer of polyester primer. This makes Metecno Glamet resistant to water absorption. The PUF core gives it high thermal immunity.
Metecno Monoroof Centesimal
just like Glamet, the Metecno Monoroof Centesimal besides is considered a traditional roof. It has an external steel face and an inner face made of the hundredth aluminum. Sandwiched between these two panels is uncompromising self-supporting polyurethane. These pitched roofs need a minimum slope of 7 %, but they can be used for lesser slopes as well – with the advice of an expert technical person. The side of the panel has an open finish manufactured from aluminum hydrofoil that has a thickness of 0.08 millimeters.
Table of Safe spans

Leave a Reply

Your email address will not be published.