2. Click the application that shows up in the start menu, or if you used the key bind press insert or OK on the Run Manager Window
3. This should open up a window that looks like the one shown below, from here type in “ ipconfig /all “ and weight-lift figure .

4. From the previous step your command motivate shell should have populated with textbook relating to your computer ‘s network connection and the hardware within your personal computer .
5. Scroll within the window until you see a header titled “ Wireless LAN Adapter Wi-Fi: “ or alternatively, if you are running from an Ethernet connection look for “ Ethernet Adapter “ .
6. Underneath this heading you should see a channel titled “ Physical Address.. .. .. .. .. : < MAC Address > ”. The text following the colon is your computer ‘s MAC Address .

7. You can then highlight the text and consumption CTRL + C to email it or save it. Another option is to write it down so that you have it readily available in the future .
Finding a Host Name on a Windows based PC:
1. Open Command Prompt ( Start Menu ⇒ Lookup “ Command Prompt “ ) .
2. From the Command Prompt blast type in “ hostname “ and press enroll .
3. The list that populates your husk is the Host Name of your machine and is what we use in the Active Directory to find your computer .

4. You can then either copy this by highlighting then using CTRL + C or by writing it down for future reference point .
Mac OS X instructions
The steps for finding a MAC on a Mac OS X machine are as follows:
1. Open organization Preferences through the Cog icon on your application browning automatic rifle or by going to the Apple icon in the top exit corner and selecting System Preferences .
2. Under Internet & Wireless open Network.

3. If you are using Wi-Fi to access our network click on the Wi-Fi tab key within the leave side menu, otherwise cluck on the Ethernet choice .

4. On the bottom right of either of these menus click the “ Advanced… “ Button .
5. This will open up a new sieve ; go to the “ Hardware “ Tab and look for “ MAC Address. ”

6. The mixture of letters and numbers following this is your computer ‘s unique MAC that we use to find you on our network .

Finding a Host Name on a Mac OS X machine:
1. Open System Preferences as outlined in Step 1 above .
2. Look for the “ Sharing “ yellow journalism within your system Preferences, this should be a blue folder with a walking road symbol within it .

3. Once you click on this yellow journalism you will see a Computer identify, this is your host name on our network .

Unix / Linux based System Instructions
The steps for finding a MAC on a Unix based machine are as follows:
1. Open up a terminal shell by either using CTRL + T or by searching for terminal within your lotion ‘s menu .
1a. note : CTRL + T only works on debian based distributions, you may need to search within the application menu .
2. From the terminal shell make sure that you have the proper permissions by entering “ sudo su. ” This will prompt you for your etymon password ; if you do n’t have a root account then type the Administrator password for your report .

    2a. Step 2 depends wholly on your Computer license scheme so may not need Sudo permissions to perform this search .
3. Within the shell type “ ifconfig “ and imperativeness enter to proceed .

4. You should nowadays see the shell populated with data about your network association ; look for eth0 if you are using a Ethernet connection or wlan0 if you are using a Wi-Fi joining on our net .
5. Next to either eth0: or wlan0: you will see “ HWaddr: “ or depending on your distribution you will see “ ether: “

The distribution used here is Ubuntu but it should be similar or exactly the same on most distributions, you can use Google to find your exact steps.

6. The letters and numbers following these submarine headers are your machine ‘s MAC Address .
Finding a Host Name on a Linux / Unix based system:
Preface: Depending on your machine ‘s security settings, you may need to enter a Sudo shell as outlined above in Step 2 .
1. Start by opening a terminal with either CTRL + ALT + T or searching for terminal within your application coach .
2. From the beat that pops up, type and record “ hostname “ or “ hostnamectl “.

3. The name that then populates the husk is your computer ‘s unique host name. alternatively, if you used “ hostnamectl “ this will be your “ Static Hostname “ .