* This is a complete Alpha-X holster with insert block of choice.
View insert Block pistol compatibility
After years of vogue setting benchmarks in the competitive holster industry, DAA has gone a step far, with the launch of the DAA Alpha-X Holster .
The Alpha-X incorporates upgrades and refinements creating a new fresh, outstanding expect while adding respective meaningful performance upgrades.

Reading: Alpha-X Holster

Body Rail Height Adjustment
A fulminate built directly into the side of the Alpha-X holster soundbox itself allows stature adjustment. This offers an exsert range of vertical bowel movement and reduces torsion and forces applied. The lock up is achieved by an expanding dovetail mechanism that does not gouge or damage the rail .
New Ball Joint and Lock-Up Mechanism
The ball joint of the Alpha-X offers a wide range of gesture, allowing the exploiter to stead the holster at the precise right slant desired. The Alpha-X holster uses a larger musket ball joint and a imperativeness lug lock-up system, which locks the ball firm in place without marking or damaging the holster. even the smallest adjustments are easily possible .
With the ball joint is now located higher and closer to the center of the holster, it reduces the torsion and forces applied, contributing to the rigidity of the holster .
A big easy-to-reach one-screw interlock system allows it to be adjusted into the desire status, even while wearing it .
Detachable Belt Hanger

The DAA Alpha-X Holster is designed with a two-piece belt hanger which can be disassembled well by opening a single cheat. All position settings are maintained while removing the holster body from the belt out itself for easily space-saving enchant .
The Alpha-X belt bracket is designed to fit only 1.5 ” across-the-board competition style belts. It will not fit on 1.75 ” or 2 ” belts unless the belts are modified by cutting a objet d’art out of the belt out. As DAA recommends for all of its Race holsters, this belt out hanger should entirely be used on a tauten, rigid, midst belts .
Interchangeable Color Logo Inlays
The Alpha-X holster torso is designed in black anodize finish alone. To offer a unique colorful stress, an categorization of color inlays is offered. These optional colored inlays can be changed as desire, but when done so are not normally reclaimable. They are laser-cut fictile inlay inserts which come in a entire range of colors .
The Same Race Master Insert Blocks!
The DAA Alpha-X Holster uses the same DAA charismatic slip in blocks as used on the Race Master Holster. An Alpha-X holster can be purchased with or without an cut-in barricade, making the upgrade easier and more low-cost for users who already have the Race Master Holster.

CRITICAL SAFETY WARNING
Read the follow instructions cautiously before using this holster or Insert Block :

  • Never holster a loaded firearm without first engaging its safety.
  • Check periodically to ensure your safety is functioning correctly.
  • Never disengage the safety of the firearm until well clear of the holster and the muzzle is pointing down range.
  • Make sure you are fully familiar with the correct use, and adjustment of your DAA Holster before attempting to use it with a loaded firearm.
  • Make sure that you have the correct holster/Insert model for your type of firearm.
  • Do not use a holster that is unsuited to your firearm, as that could result in unreliable retention or release which could lead to a fatal accident.
  • Never use a trigger shoe or a widened trigger with this holster.
  • Double check that the retention and release work well, particularly if any modifications have been made to your firearm.
  • Care must be taken to ensure the gun is placed properly when returned to the holster. It if it is not positioned correctly, it will not be held securely and may fall out.
  • Never holster the gun quickly or with force, as that increases the chance of making contact with the trigger.
  • Any adjustment or modification to the holster design may render it unsafe or cause malfunction.
  • Take care that the firearm is not dislodged or knocked when holstered, particularly when the holster’s safety lever is unlocked. As this holster has no muzzle support, take care that the muzzle of the gun is not bumped upwards, as this may dislodge the gun from the holster
  • Keep your fingers well clear of the trigger when holstering and drawing the firearm.
  • The holster should be locked when running or jumping with a holstered gun, or you should keep your hand on the gun’s grip to prevent it accidentally falling.
  • Handling a loaded firearm, and drawing it from a holster is inherently dangerous. You do so entirely at your own risk and responsibility.  
  • Liability is limited only to the replacement of this holster or parts thereof. No additional warranties are expressed or implied by the manufacturer or the distributors.

The Alpha-X Competition Holsters are compatible with the follow pistols :

  • 1911 Single Stack Steel Frame
  • Alien 
  • Arsenal Stryk B
  • Beretta 92F, Beretta 92X Performance
  • BUL SAS 2 Steel Frame, BUL M5, BUL SAS II, BUL SAS
  • SPS
  • CANIK TP9SF
  • Caspian
  • CZ P09, CZ P10 F/C, CZ Shadow 2, CZ Shadow 2 Orange, CZ SP01, CZ TS2, CZ TS CzechMate, CZ TS Orange
  • Glock
  • GP X-Calibur MK07/MK012
  • GP6/K-100
  • HK VP9
  • HK-USP
  • Para Ordinance
  • Phoenix Redback, Phoenix Trinity
  • S&W L/K Frame, S&W M&P, S&W N Frame
  • SIG 226, SIG 228, SIG P210, SIG P320, SIG X5/X6, SIG X5 Xmount
  • Sphinx 3000, Sphinx SDP
  • Springfield XDM
  • STI, STI DVC, Staccato
  • STI Range Master
  • SVI Aluminum or Steel Frame, SVI Single Stack
  • Tanfoglio, Tanfoglio Stock 2, Tanfoglio Stock 3
  • Walther Q5 Match, Walther Q5 Match SF
generator : https://themedipia.com
Category : Website hosting

Leave a Reply

Your email address will not be published.